Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2004 >> S10 Pickup >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Wiper System & Washer System) >> Repair Instructions >> Wiper Motor Module Replacement (Rear) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Safari and 2004 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the liftgate garnish molding. Refer to Garnish Molding Replacement - Liftgate .
  2. Disconnect the two electrical connectors from the controller module assembly.
    Fig 1: Locating Controller Module Assembly Electrical Connectors
    GM439172Courtesy of GENERAL MOTORS CORP.
  3. Drill the heads from the rivets with an appropriate drill bit.
  4. Remove two rivets and the controller assembly from the liftgate.
scientia non olet · About Mike's Workshop Manuals