Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2004 >> Optra Base, Standard >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Repair Instructions >> Seat Belt Height Adjuster Replacement - Front >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Seat Belt Height Adjuster
    GM1308486Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the seat belt height adjuster with the bolts.

    Tighten:  Tighten the front seat belt height adjuster bolts to 23 N.m (17 lb ft)  .

  2. Install the upper center pillar trim panel. Refer to Center Pillar Upper Trim Panel Replacement .
scientia non olet · About Mike's Workshop Manuals