Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2004 >> Optra Base, Standard >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Repair Instructions >> Driver or Passenger Seat Belt Buckle Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Seat Belt Buckle With Bolt And Electrical Connector In Place
    GM1308521Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the front seat belt bolt and washer.

    Tighten:  Tighten the front seat belt bolt to 42 N.m (31 lb ft)  .

  2. For driver seat belt buckle, connect the electrical connector.
scientia non olet · About Mike's Workshop Manuals