Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2004 >> Malibu Maxx >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Control System (Introduction) - 2.2L (L61)) >> Repair Instructions >> Manifold Absolute Pressure (MAP) Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Manifold Absolute Pressure (MAP) Sensor
    GM897270Courtesy of GENERAL MOTORS CORP.
  1. Install the MAP sensor with the port seal into the intake manifold
  2. Connect the MAP sensor harness connector. Push in the connector until a click is heard and pull back to confirm a positive engagement.
  3. Install the throttle body. Refer to Throttle Body Assembly Replacement .
  4. Install the air cleaner outlet resonator. Refer to Air Cleaner Outlet Resonator Replacement .
scientia non olet · About Mike's Workshop Manuals