Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2004 >> Malibu Maxx >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Introduction) - 3.5L (Lx9) >> Repair Instructions >> Fuel Level Sensor Replacement (Malibu MAXX) >> Removal Procedure

Removal Procedure

  1. Remove the fuel pump module assembly. Refer to Fuel Sender Assembly Replacement (Malibu Sedan) or Fuel Sender Assembly Replacement (Malibu MAXX) .
  2. Release the fuel level sensor wiring harness from the molded-in tab on the pump module bowl.
  3. Disconnect the fuel level sensor electrical connector from the pump module cover.
    4. Fig 1: Sliding Level Sensor Away From Pump Module
    GM1236111Courtesy of GENERAL MOTORS CORP.
  4. Depress the retaining tab on the sensor and begin to slide the level sensor away from the pump module.
  5. Carefully slide the level sensor the rest of the way off of the pump module.
scientia non olet · About Mike's Workshop Manuals