Installation Procedure

Fig 1: Installing EGR Valve

GM1239053

Courtesy of GENERAL MOTORS CORP.

Install a new EGR valve gasket.
Install the EGR valve.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the EGR valve bolts.
Tighten: Tighten the bolt to 30 N.m (22 lb ft).
Install the EGR pipe to the EGR valve.
Install the EGR pipe.
Tighten: Tighten the bolt to 25 N.m (18 lb ft).
Connect the EGR valve electrical connector.