Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2004 >> Malibu Maxx >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Introduction) - 3.5L (Lx9) >> Repair Instructions >> Exhaust Gas Recirculation (EGR) Pipe Replacement >> Removal Procedure

Removal Procedure

  1. Remove the exhaust gas recirculation (EGR) pipe bolt and carefully pull the pipe assembly back.
  2. Remove the EGR pipe assembly bolts from the exhaust manifold.
    3. Fig 1: Removing EGR Pipe
    GM1239050Courtesy of GENERAL MOTORS CORP.
  3. Remove the EGR pipe.
scientia non olet · About Mike's Workshop Manuals