Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2004 >> Malibu Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Introduction) - 2.2L (L61) >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement (Malibu MAXX) >> Installation Procedure

Installation Procedure

    Fig 1: Installing New Fuel Tank Pressure Sensor To Modular Fuel Sender (Malibu MAXX)
    GM1236106Courtesy of GENERAL MOTORS CORP.
  1. Install the new fuel tank pressure sensor to modular fuel sender.
  2. Install the electrical connector to fuel tank pressure sensor.
  3. Install the fuel tank. Refer to Fuel Tank Replacement (Malibu Sedan)  and Fuel Tank Replacement (Malibu MAXX) .
  4. Refill tank.
  5. Install the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure in Engine Electrical.
scientia non olet · About Mike's Workshop Manuals