Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2004 >> Malibu Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Introduction) - 2.2L (L61) >> Repair Instructions >> Fuel Hose/Pipes Replacement - Engine Compartment >> Removal Procedure

Removal Procedure

  1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure .
  2. Disconnect the engine fuel feed pipe from the chassis fuel flex hose. Refer to Quick Connect Fitting(s) Service (Metal Collar) .
    3. Fig 1: Identifying Fuel Hose/Pipes (2.2L)
    GM1238956Courtesy of GENERAL MOTORS CORP.
  3. Using a backup wrench on the fuel rail, disconnect the fuel feed pipe at the fuel rail.
  4. Remove the fuel feed pipe fastener located at the top of the exhaust manifold heat shield.
  5. Remove the engine fuel feed pipe.
scientia non olet · About Mike's Workshop Manuals