Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2004 >> Impala SS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Control System 3.4L (Introduction)) >> Repair Instructions >> Exhaust Gas Recirculation (EGR) Pipe Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the exhaust gas recirculation (EGR) pipe bolt and carefully pull the pipe assembly back.
  2. Remove the EGR pipe assembly nut from the exhaust manifold.
  3. Remove the EGR pipe.
    4. Fig 1: Removing EGR Pipe
    GM621066Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals