Installation Procedure

WARNING: This page is about a different car, the 2008 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of TV Antenna Amplifier & Components

Courtesy of GENERAL MOTORS CORP.

Install the TV antenna amplifier module (2).
Ensure that the alignment tab is located properly before tightening the bolts (1).

NOTE: Refer to Fastener Notice .

Install the bolts (1).
Tighten: Tighten the bolts (1) to 9 N.m (80 lb in).
Connect the coaxial cable (4) and the electrical connection (3).
Install the left and, or right quarter trim panels. Refer to Quarter Upper Trim Panel Replacement .