Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2004 >> Impala LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 1095 (Supplemental Inflatable Restraint System) >> Diagnostic Information and Procedures >> Passenger Presence System Preload Test >> Passenger Presence System Preload System Test Procedure (Existing Module)

Passenger Presence System Preload System Test Procedure (Existing Module)

WARNING: This page is about a different car, the 2012 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. With Service Programming System (SPS) , unlock the passenger presence module.
  2. Empty the front passenger seat.
  3. With the scan tool, perform the Passenger Presence Sensor Learn procedure.
  4. If the test fails, adjust the seat bottom trim, and massage the cover to ensure unwanted pressure is not present in the specified area, and perform the Passenger Presence Sensor Learn procedure again.
  5. Once the test successfully completes, cycle the ignition key OFF.
  6. Perform the Diagnostic System Check - Vehicle after successfully completing the Passenger Presence Sensor Learn procedure to ensure the system is functioning properly.
scientia non olet · About Mike's Workshop Manuals