Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2004 >> Epica LS >> Repair and Diagnosis >> Steering >> Steering Wheel & Steering Column >> Repair Instructions >> Multifunction, Turn Signal Switch Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Steering Column Cover Panel And Screws
    GM1255836Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
  1. Disconnect the negative battery cable.
  2. Remove the upper and the lower steering column cover panel screws.
  3. Remove the upper and the lower steering column cover panels.
    4. Fig 2: Identifying Turn Signal Switch Tabs
    GM1255838Courtesy of GENERAL MOTORS CORP.
  4. Remove the turn signal switch by pushing in on the tabs on the top and the bottom of the switch housing.
  5. Disconnect the electrical connections from the turn signal switch.
scientia non olet · About Mike's Workshop Manuals