Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2004 >> Epica LS >> Repair and Diagnosis >> Body & Frame >> Windows >> Body Glass System >> Diagnostic Information and Procedures >> Diagnostic System Check - Defogger >> Test Description

Test Description

The numbers below refer to the step numbers on the diagnostic table.

  1. 2:  Lack of communication may be due to a partial malfunction of the serial data circuit or due to a total malfunction of the serial data circuit. The specified procedure will determine the particular condition.
Step Action Yes No
Schematic Reference:  Defogger Schematics  
1 Install a scan tool.
Does the scan tool power up?		 Go to Step 2  Go to Scan Tool Does Not Power Up in Data Link Communications
2 
  1. Turn ON the ignition, with the engine OFF.
  2. Attempt to establish communication with the ISU.
Does the scan tool communicate with the ISU?		 Go to Step 3  Go to Scan Tool Does Not Communicate with Component in Data Link Communications
3 Select the ISU display DTC function on the scan tool.
Does the scan tool display any DTCs?		 Go to Diagnostic Trouble Code (DTC) List  Go to Symptoms - Stationary Windows 
scientia non olet · About Mike's Workshop Manuals