Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2004 >> Cutaway 6.0 U >> Repair and Diagnosis >> External Pages >> Different car >> Section 135 (Engine Control System - 4.3L (Introduction)) >> Repair Instructions >> Fuel Pressure Connection Valve Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Savana and 2004 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Valve Core
    GM586374Courtesy of GENERAL MOTORS CORP.
  1. Use a standard valve core tool in order to install a new valve core (2).
  2. Tighten the fuel filler cap.
  3. Connect the negative battery cable.
  4. Inspect for leaks.
    1. Turn ON the ignition for 2 seconds.
    2. Turn OFF the ignition for 10 seconds.
    3. Turn ON the ignition for 2 seconds.
    4. Inspect for fuel leaks.
  5. Install the fuel pressure connection valve cap (3).
  6. Install the engine cover. Refer to Engine Cover Replacement Interior Trim.
scientia non olet · About Mike's Workshop Manuals