Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2004 >> Classic >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Engine Controls (Introduction) -- 2.2L (L61)) >> Repair Instructions >> Fuel Injector Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Am and 2004 Oldsmobile Alero. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Fuel Rail
    GM783968Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Always install new injector O-rings when servicing the fuel injectors. Lubricate the new injector O-rings with clean engine oil
  1. Install the O-rings (3, 4) on the fuel injector (5).
  2. Install the fuel injector clip (6) on the fuel injector (5).
    3. IMPORTANT: The fuel injector will click when the injector is installed correctly.
  3. Install the fuel injector (5) in the fuel rail (1) with the connector facing upward.
  4. Install the fuel rail (1). Refer to Fuel Rail Assembly Replacement .
scientia non olet · About Mike's Workshop Manuals