Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2004 >> Classic >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Generator Replacement (2.2L (L61)) >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Generator Bolts
    GM758471Courtesy of GENERAL MOTORS CORP.
  1. Install the generator.
  2. Raise the vehicle.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the generator bolts.

    Tighten:  Tighten the generator bolts to 22 N.m (16 lb ft).

  4. Connect the generator electrical connectors.

    Tighten:  Tighten the generator electrical connector to 20 N.m (15 lb ft).

  5. Install the drive belt. Refer to Drive Belt Replacement in Engine Mechanical-2.2L (L61).
  6. Install the oil level indicator tube bolt. Refer to Oil Level Indicator and Tube Replacement in Engine Mechanical-2.2L (L61).
  7. Remove the air cleaner resonator. Refer to Air Cleaner Outlet Resonator Replacement in Engine Controls-2.2L (L61).
  8. Lower the vehicle.
  9. Connect the battery negative cable.
scientia non olet · About Mike's Workshop Manuals