Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2004 >> Chevy Express G2500, Van Cargo Extended, 4.3 X, 4L60E/M30 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 4.3L (Introduction) >> Repair Instructions >> Exhaust Gas Recirculation (EGR) Pipe Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of EGR Pipe
    GM486681Courtesy of GENERAL MOTORS CORP.
  1. Remove the engine cover. Refer to Engine Cover Replacement in Interior Trim.
  2. Remove the retaining fastener from the EGR pipe bracket.
  3. Loosen the pipe fittings at both ends of the EGR pipe.
  4. Remove the EGR pipe.
scientia non olet · About Mike's Workshop Manuals