Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2004 >> Cavalier Base, 4D Sedan, 2.2 6 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Controls - 2.2L (L61) Introduction) >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Install the FTP sensor to the fuel sender.
    Fig 1: Identifying Fuel Tank Pressure (FTP) Sensor
    GM61928Courtesy of GENERAL MOTORS CORP.
  2. Connect the FTP sensor connector.
    Fig 2: View Of Fuel Tank Pressure (FTP) Sensor Connector
    GM373185Courtesy of GENERAL MOTORS CORP.
  3. Install the fuel tank. Refer to Fuel Tank Replacement .