Installation Procedure

WARNING: This page is about a different variant/trim than selected.

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.

Install the accelerator bracket (2) on the throttle body (1).
Tighten: Tighten the accelerator bracket nuts to 10 N.m (89 lb in).

Fig 1: View Of Accelerator Bracket
Courtesy of GENERAL MOTORS CORP.
Connect the accelerator control cable (3) to the throttle body (4) and accelerator bracket (1).

Fig 2: Control Cable Bracket View
Courtesy of GENERAL MOTORS CORP.
Connect the cruise control cable (2) from the throttle body (3) and accelerator bracket (1).

Fig 3: Identifying Cruise Control Cable
Courtesy of GENERAL MOTORS CORP.
Install the air cleaner outlet resonator. Refer to Air Cleaner Outlet Resonator Replacement .