Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2004 >> Astro Van Cargo, AWD >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Repair Instructions >> Seat Belt Retractor Replacement - Right Front >> Installation Procedure

Installation Procedure

  1. Install the retractor to the vehicle.
  2. Install the electrical connectors.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the retractor bolt to the pillar.

    Tighten:  Tighten the retractor bolt to the pillar to 53 N.m (39 lb ft).

  4. Install the cover to the base of the retractor.
  5. Install the bolt retaining the shoulder belt to the guide adjuster bracket.

    Tighten:  Tighten the shoulder belt retaining bolt to

    30 N.m (22 lb ft).

    Fig 1: View Of Shoulder Belt Guide Adjuster Bracket Retaining Bolt - Right Front
    GM361955Courtesy of GENERAL MOTORS CORP.
  6. Install the right front lock pillar inside garnish molding. Refer to Garnish Molding Replacement - LF Lock Pillar in Interior Trim.
  7. Install the cover to the shoulder belt guide.
  8. Install the seat belt to the seat belt guide located on the side of the bucket seat.
  9. Slide the front seat back in position.
scientia non olet · About Mike's Workshop Manuals