Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2004 >> Astro Van Cargo, AWD >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Repair Instructions >> Seat Belt Buckle Replacement - Front >> Installation Procedure

Installation Procedure

  1. Install the seat belt buckle.
  2. Connect the seat belt buckle warning electrical connector.
  3. Install the seat belt buckle to the floor stud.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the nuts located at the base of the seat riser.

    Tighten:  Tighten the bucket seat to the floor to 35 N.m (26 lb ft).

    Fig 1: Locating Seat Riser Mounting Nuts - Front
    GM361846Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals