Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2003 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Suspension Control System - Suspension Leveling >> Repair Instructions >> Automatic Level Control Relay Replacement >> Installation Procedure

Installation Procedure

  1. Install electrical connector (1) into the automatic level control relay (2).
    Fig 1: Installing Electrical Connector Into Automatic Level Control Relay
    G01483342Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install mounting screw (1) into the automatic level control relay.

    Tighten 

    Tighten screw to 6 N.m (53 lb in).

  3. Lower the vehicle.
    Fig 2: Installing Mounting Screw Into Automatic Level Control Relay
    G01483343Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals