Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2003 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System And Washer System >> Repair Instructions >> Wiper Module Cover Replacement >> Removal Procedure

Removal Procedure

  1. Open the hood.
  2. Remove the hood rear seal part way to gain access to the wiper drive system module cover retainers.
  3. Remove the wiper drive system module cover from the pinchweld flange.
  4. Remove the wiper drive system module cover from the engine compartment.
    Fig 1: Removing Wiper Drive System Module Cover From Engine Compartment
    G01534204Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals