Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2003 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting Systems >> Repair Instructions >> Stop Lamp Switch Replacement >> Installation Procedure

Installation Procedure

  1. Install the stop lamp switch (1) to the brake pedal bracket (2).
  2. Connect the electrical connectors to the stop light switch.
  3. Install the left side of the instrument panel insulator. Refer to CLOSEOUT/INSULATOR PANEL REPLACEMENT - LEFT in Instrument Panel, Gages and Console.
  4. Adjust the stop lamp switch. Refer to STOP LAMP SWITCH ADJUSTMENT  .
    Fig 1: Installing Stop Lamp Switch And Cruise Control Switch Into Brake Pedal Bracket
    G01534038Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals