Installation Procedure

Connect the electrical connectors to the console.

Fig 1: Connecting Electrical Connectors To Console
Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
Install the screws to the dome light.
Tighten

Tighten the screws to 2 N.m (18 lb in).

Fig 2: Installing Screws To Dome Light
Courtesy of GENERAL MOTORS CORP.
Install the screws to the rear of the DVD screen.
Tighten

Tighten the screws to 2 N.m (18 lb in).

Fig 3: Installing Screws To Rear Of DVD Screen
Courtesy of GENERAL MOTORS CORP.
Install the bulbs in the dome light.

Fig 4: Installing Bulbs In Dome Light
Courtesy of GENERAL MOTORS CORP.
Install the dome light lens cover.

Fig 5: Installing Dome Light Lens Cover
Courtesy of GENERAL MOTORS CORP.
Raise the screen and lock the screen into place.

Fig 6: Raising Screen And Lock Screen Into Place
Courtesy of GENERAL MOTORS CORP.