Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2003 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Repair Instructions >> Cruise Release Switch Replacement >> Removal Procedure

Removal Procedure

  1. Remove the left side instrument panel insulator. Refer to CLOSEOUT/INSULATOR PANEL REPLACEMENT - LEFT  in Instrument Panel, Gages and Console.
  2. Rotate the cruise control release switch counterclockwise until the travel stop has been reached (approximately 60 degrees).
    Fig 1: Rotating Cruise Control Release Switch
    G01533021Courtesy of GENERAL MOTORS CORP.
  3. Remove the cruise control release switch from the retainer.
  4. Disconnect the cruise control release switch electrical connector.
    Fig 2: Disconnecting Cruise Control Release Switch Electrical Connector
    G01533022Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals