Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2003 >> Tracker 2D Utility, RWD, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Repair Instructions >> Cruise Control Switch Replacement >> Removal Procedure

Removal Procedure

  1. Remove the IP cluster trim plate. Refer to TRIM PLATE BEZEL REPLACEMENT - INSTRUMENT PANEL (I/P) CLUSTER in Instrument Panel, Gages and Console.
  2. Using a taped flat bladed tool, gently pry the cruise control switch from the instrument panel.
  3. Disconnect the cruise control switch electrical connector.
  4. Remove the switch from the vehicle.
    Fig 1: Removing Cruise Control Switch From Instrument Panel
    G01408066Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals