Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2003 >> Tracker 2D Utility, RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (Automatic Transaxle Servicing) >> Removal & Installation >> Intermediate-4TH Servo Assembly >> Installation

Intermediate-4TH Servo Assembly: Installation

WARNING: This page is about a different car, the 2003 Pontiac Grand Am and 2003 Oldsmobile Alero. However, it is still accessible from the selected car via links, so may be relevant.
  1. Assemble the intermediate-4th servo assembly.
  2. Install the intermediate-4th band servo piston spring, the servo and the servo cover bolts. Tighten the bolts to specification. See TORQUE SPECIFICATIONS  .
  3. Install the oil feed pipes. See OIL FEED PIPES  .
  4. Install the filter and the pan. See DRAINING & REFILLING  under LUBRICATION.
  5. Lower the vehicle.
  6. Fill transaxle with appropriate fluid to proper level. See LUBRICATION  .
  7. Connect the negative battery cable.
  8. Inspect the transaxle oil level.
scientia non olet · About Mike's Workshop Manuals