Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2003 >> SSR Base >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust System >> Repair Instructions >> Exhaust Manifold Heat Shield Replacement - Left >> Installation Procedure

Installation Procedure

    Fig 1: Exhaust Manifold Heat Shield & Bolts (Left)
    GM1208464Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  1. Install the heat shield and nuts to the exhaust manifold.

    Tighten:  Tighten the nuts to 9 N.m (80 lb in).

  2. Install the spark plugs. Refer to Spark Plug Replacement in Engine Controls - 4.8L, 5.3L, and 6.0L.
scientia non olet · About Mike's Workshop Manuals