Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2003 >> SSR Base >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Seat Switch Replacement - Power >> Installation Procedure

Installation Procedure

  1. Connect the electrical connector on the seat switch harness to the seat wiring harness.
    2. Fig 1: Identifying Seat Switch & Bezel
    GM1293225Courtesy of GENERAL MOTORS CORP.
  2. Install the seat switch (4) to the seat switch bezel (3) by snapping the switch assembly into the bezel. Verify that the retaining tabs are fully seated.
  3. Install the seat switch bezel. Refer to Seat Switch Bezel Replacement .
  4. Install the seat cushion outer trim panel to the seat assembly. Refer to Seat Cushion Outer Trim Panel Replacement .
scientia non olet · About Mike's Workshop Manuals