Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2003 >> SSR Base >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System And Washer System >> Repair Instructions >> Wiper Arm Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Aligning Wiper Blades
    GM872389Courtesy of GENERAL MOTORS CORP.
  1. Install the wiper arms onto the wiper transmission.
  2. Align the wiper blades to the alignment marks.
    3. Fig 2: View Of Wiper Arm Nut & Cover
    GM871364Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  3. Install the wiper arm nut.

    Tighten:  Tighten the nut to 30 N.m (22 lb ft).

  4. Install the wiper arm nut cover.
  5. Connect the washer hose.
  6. Operate the windshield wipers and inspect for proper operation.
  7. Close the hood.
scientia non olet · About Mike's Workshop Manuals