Cruise Control Indicator Always On

Step	Action	Yes	No
Schematic Reference: Cruise Control Schematics
1	Did you perform the Cruise Control Diagnostic System Check?	Go to Step 2	Go to Diagnostic System Check - Cruise Control
2	Turn ON the ignition, with the engine OFF. Does the Cruise indicator illuminate after the instrument panel cluster (IPC) displays test?	Go to Step 3	Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems
3	Turn OFF the ignition. Install a scan tool. Turn ON the ignition, with the engine OFF. With the scan tool, observe the Cruise Control parameter in the IPC Input/Output data list. Does the Cruise Control parameter display On?	Go to Step 4	Go to Step 5
4	IMPORTANT: Program the replacement powertrain control module (PCM). Replace the PCM. Refer to Powertrain Control Module (PCM) Replacement in Engine Controls - 4.8L, 5.3L, 6.0L.Did you complete the replacement?	Go to Step 6	-
5	Replace the IPC. Refer to Instrument Panel Cluster (IPC) Replacement in Instrument Panel, Gages, and Console. Did you complete the replacement?	Go to Step 6	-
6	Operate the system in order to verify the repair. Does the system operate properly?	System OK	Go to Step 2