Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2003 >> Impala LS >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust System >> Repair Instructions >> Exhaust System Insulator, Hanger, Bracket Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Exhaust Pipe Rear Hangers
    GM194710Courtesy of GENERAL MOTORS CORP.
  1. Install the exhaust pipe rear hangers to the muffler and the rear exhaust hanger brackets.
    2. Fig 2: Exhaust Pipe Hanger
    GM373046Courtesy of GENERAL MOTORS CORP.
  2. Install the exhaust pipe hanger to the exhaust pipe and the exhaust hanger bracket.
    3. Fig 3: Exhaust Pipe Hanger, Exhaust Pipe & Exhaust Hanger Bracket
    GM892635Courtesy of GENERAL MOTORS CORP.
  3. Install the exhaust pipe hanger (3) to the exhaust pipe (2) and the exhaust hanger bracket (1).
  4. Remove the support from the exhaust system.
  5. Inspect the exhaust system for underbody contact.
  6. Lower the vehicle.
scientia non olet · About Mike's Workshop Manuals