Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2003 >> Chevy Express G2500, Van Passenger Extended >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Transfer Case - Servicing) >> Lubrication >> Checking Fluid Levels

Checking Fluid Levels

WARNING: This page is about a different variant/trim than selected.
  1. Raise and support vehicle. Remove filler plug located on rear of transfer case.
  2. Ensure fluid is level with bottom edge of filler plug hole.
  3. Fill transfer case through oil filler plug hole to specified capacity using recommended fluid. See RECOMMENDED FLUIDS .
  4. Install the fill plug. Apply pipe sealant (P/N-12346004) to the threads on the fill plug. Tighten to specification. See TORQUE SPECIFICATIONS .
scientia non olet · About Mike's Workshop Manuals