Conditions For Running DTC

DTC P0101, P0102, P0103, P0107, P0108, P0120, P0220, P0401, P0404, P0405, P0442, P0443, P0446, P0455, P1125, P1514, P1515, P1516, P1518, P2108, P2120, P2121, P2125, P2126, P2130, P2131, P2135 are not set.
The engine speed is between 400-5,000 RPM.
The change in engine speed is less than 125 RPM.
Traction control, if equipped, is not active.
The A/C compressor clutch is steady.
The power steering is stable.
The power take-off (PTO), if equipped, is not active.
The clutch switch state does not change, if equipped with a manual transmission.
The brake switch state does not change.
The above conditions are met for 1 second.