Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2002 >> Venture Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 1479 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Negative Cable Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Cadillac Eldorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the battery negative cable to the vehicle.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the nut (1) securing the battery negative cable to the side rail.

    Tighten 

    Tighten the battery negative cable to side rail nut to 17 N.m (13 lb ft).

    Fig 1: Nut Securing Battery Negative Cable To Side Rail
    G01653769Courtesy of GENERAL MOTORS CORP.
  3. Install the nut securing the battery negative cable to the engine.

    Tighten 

    Tighten the battery negative cable to engine nut to 25 N.m (18 lb ft).

  4. Install the right front gusset. Refer to GUSSET REPLACEMENT - RIGHT in Body Front End.
  5. Connect the battery negative cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
    Fig 2: Battery Negative Cable
    G01653770Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals