Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.

Install the ALC shield (2) onto the vehicle.
Install the ALC relay onto the vehicle. Refer to AUTOMATIC LEVEL CONTROL RELAY REPLACEMENT .

Fig 1: Installing ALC Shield Onto Vehicle
Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
Install the ALC shield bolt (1) and retainers to the vehicle.
Tighten

Tighten the bolts to 6 N.m (53 lb in).
Install the ALC compressor assembly onto the vehicle. Refer to AIR COMPRESSOR REPLACEMENT .
Lower the vehicle.

Fig 2: Installing ALC Shield Bolt And Retainers To Vehicle
Courtesy of GENERAL MOTORS CORP.