Fastener Tightening Specifications
WARNING: This page is about a different car, the 2002 Cadillac Seville. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Check Link Arm Studs | 9 N.m | 80 lb in |
| Check Link Nuts | 9 N.m | 80 lb in |
| Door Latch Screws | 10 N.m | 89 lb in |
| Door Striker Bolts | 27 N.m | 20 lb ft |
| Front Window Channel Bolts (Rear Door) | 9 N.m | 80 lb In |
| Hinge-to-Body Bolts | 30 N.m | 22 lb ft |
| Hinge-to-Door Nuts | 34 N.m | 25 lb ft |
| Inside Door Handle Nuts | 3 N.m | 27 lb in |
| Intermediate Door Hinge Bolts | 24 N.m | 18 lb ft |
| Lock Switch Screws | 2 N.m | 18 lb in |
| Mirror Nuts | 9 N.m | 80 lb in |
| Outside Door Handle Nuts | 7 N.m | 62 lb in |
| Rear Stationary Window Division Post Bolt | 9 N.m | 80 lb in |
| Rear Stationary Window Screws | 5 N.m | 44 lb in |
| Reveal Molding Screws to Center Pillar | 1.4 N.m | 12 lb in |
| Reveal Molding Nuts to Door Flange | 2 N.m | 18 lb in |
| Reveal Molding Screws to Header | 1.4 N.m | 12 lb In |
| Trim Panel Lower Screws | 0.5 N.m | 4 lb in |
| Trim Panel Pull Handle to Door Screws | 2 N.m | 18 lb in |
| Trim Panel Remote Handle Screw | 2 N.m | 18 lb in |
| Window Clamp Bolts | 10.5 N.m | 93 lb in |
| Window Motor Screws | 4.6 N.m | 41 lb in |
| Window Regulator Bolts | 9 N.m | 80 lb in |