Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2002 >> Venture Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 1281 (Power Steering System) >> Repair Instructions >> Power Steering Pulley Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Cadillac Eldorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the power steering pulley to the power steering pump using J 25033-C. 
  2. Ensure that the axial tolerance of the power steering pulley on the power steering pump is within 0.25 mm (0.010 in).
  3. Install the power steering pump to the engine. Refer to Power Steering Pump Replacement 
  4. Bleed the power steering system. Refer to Bleeding the Power Steering System 
  5. Inspect the power steering system for leaks.
    Fig 1: Ensuring Axial Tolerance Of Power Steering Pulley On Power Steering Pump
    G01651561Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals