Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2002 >> Venture Plus >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust System >> Repair Instructions >> Exhaust Hanger Replacement >> Installation Procedure

Installation Procedure

  1. Install the catalytic converter hanger.
    NOTE: Refer to FASTENER NOTICE .
  2. Install the catalytic converter hanger bolts.

    Tighten 

    Tighten the catalytic converter hanger bolts to 35 N.m (26 lb ft).

  3. Install the catalytic converter hanger insulators to the catalytic converter.
  4. Lower the vehicle.
    Fig 1: Installing Catalytic Converter Hanger & Bolts
    G01829697Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals