Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2002 >> Tracker 2D Utility, RWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1445 (Door System, Mirror System & Window System) >> Repair Instructions >> Power Mirror Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Tracker. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the following components from the instrument panel:
    1. 1.1. The 3 screws (2)
    2. 1.2. The IP steering column opening trim plate (1)
    Fig 1: Instrument Panel Steering Column Opening Trim Plate Screw
    G01408308Courtesy of GENERAL MOTORS CORP.
  2. Release the upper and lower retaining tabs behind the instrument panel which secure the outside remote control rearview mirror switch (5).
  3. Slide the rearview mirror switch (5) from the instrument panel in order to disconnect the electrical connector.
  4. Disconnect the rearview mirror switch electrical connector.
  5. Remove the rearview mirror switch (5) from the vehicle.
    Fig 2: Removing Rearview Mirror Switch From Vehicle
    G01408309Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals