Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2002 >> Tracker 2D Utility, RWD, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Repair Instructions >> Cruise Control Cable Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Removing Cruise Control Module Cover
    GM488523Courtesy of GENERAL MOTORS CORP.
  1. Remove the cruise control module cover (1).
    2. Fig 2: Removing Cruise Control Servo Cable
    GM488533Courtesy of GENERAL MOTORS CORP.
  2. Loosen the cruise control servo cable locknut (5).
  3. Remove the cruise control servo cable (3) from the cruise control servo assembly (1).
    4. Fig 3: Removing Cruise Control Servo Cable From Retainers
    GM488527Courtesy of GENERAL MOTORS CORP.
  4. Remove the cruise control servo cable (3) from the cruise control servo cable retainers (5).
    5. Fig 4: Removing Cruise Control Servo Cable From Accelerator Pedal
    GM488525Courtesy of GENERAL MOTORS CORP.
  5. Remove the cruise control servo cable from the accelerator pedal (1).
  6. Unclip the retainer (2) and grommet (4) which secure the cruise control servo cable from underneath the instrument panel.
  7. Remove the cruise control servo cable from the vehicle.
scientia non olet · About Mike's Workshop Manuals