Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2002 >> Tracker 2D Utility, 4WD, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Repair Instructions >> Cruise Control Switch Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Removing Cruise Control Switch
    GM812034Courtesy of GENERAL MOTORS CORP.
  1. Remove the IP cluster trim plate. Refer to TRIM PLATE BEZEL REPLACEMENT - INSTRUMENT PANEL (I/P) CLUSTER .
  2. Using a taped flat bladed tool, gently pry the cruise control switch from the instrument panel.
  3. Disconnect the cruise control switch electrical connector.
  4. Remove the switch from the vehicle.
scientia non olet · About Mike's Workshop Manuals