Removal Procedure

Important:  Use the proper tool in order to separate all the ball joints.

1. Raise the vehicle.
2. Remove the prevailing torque nut (1) from the connecting rod (4) ball stud. Discard the prevailing torque nut (1).
3. Disconnect the connecting rod (4) from the relay rod (2).
4. Remove the prevailing torque nut (1) from the pitman arm (3) ball stud. Discard the prevailing torque nut (1).
5. Disconnect the connecting rod (1) from the pitman arm (3).
6. Inspect the ball stud threads for damage.
7. Inspect the ball stud seals for excessive wear.
8. Clean the threads on the ball stud.