Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2001 >> Corvette Base, 2D Convertible, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control Modules >> Self-Diagnostic System >> Power Seat Systems Diagnostic System Check

Power Seat Systems Diagnostic System Check

  1. Connect scan tool to Data Link Connector (DLC) located under steering column. If scan tool powers up, go to next step. If scan tool does not power up, go to TEST A: SCAN TOOL DOES NOT POWER UP  under SYSTEM TESTS.
  2. Turn ignition on. Attempt to establish communication with the Driver Door Module (DDM), Seat Control Module (SCM), Body Control Module (BCM) and Powertrain Control Module (PCM). If scan tool communicates with all systems, go to next step. If scan tool does not communicate with all systems, go to TEST B: SCAN TOOL DOES NOT COMMUNICATE WITH CLASS 2 DEVICE  under SYSTEM TESTS.
  3. Using scan tool, select SCM module DTC function. Select DDM DTC function. Select BCM DTC function. Select PCM DTC function. If scan tool displays any DTCs, go to next step. If scan tool does not display and DTCs, diagnose problem by symptom. See POWER SEATS - CORVETTE article.
  4. If scan tool displays any DTCs which begin with "U", go to TEST B: SCAN TOOL DOES NOT COMMUNICATE WITH CLASS 2 DEVICE  under SYSTEM TESTS. If scan tool does not display any DTCs that begin with "U", go to next step.
  5. If DTC B0605 is not set, go to next step. If DTC B0605 is set, go to DTC B0605: BCM INTERNAL MEMORY MALFUNCTION  under SYSTEM TESTS.
  6. If DTC P0562 or P0563 are set, see GENERATORS & REGULATORS - CORVETTE article in STARTING & CHARGING SYSTEMS. If DTC P0562 or P0563 are not set, perform appropriate test in accordance with DTC retrieved. See POWER SEATS - CORVETTE article.
scientia non olet · About Mike's Workshop Manuals