Code Enable Criteria

• Engine is running.
• Engine speed is 400-5000 RPM.
• Change in engine speed is less than 100 RPM.
• Traction control is not active.
• Throttle position is 0-100 percent.
• Change in idle air is less than 10 grams/second.
• Change in EGR position is less than 20 percent.
• No change in A/C clutch status.
• No change in power steering switch status.
• Power Take-Off is not active.
• No change in clutch status (M/T).
• No change in brake switch status.
• DTCs P0101, P0102, P0103, P0107, P0108, P0121, P0122, P0123, P0401, P0404, P0405, P0410, P0440, P0442, P0443, and P0446 are not set.
• All conditions are stable for 2 seconds.

DTC sets when actual MAP sensor signal is not within predicted range for 1.5 seconds.