Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2001 >> Chevy Express G2500, Van Cargo Extended, 5.0 M >> Repair and Diagnosis >> External Pages >> Different car >> Section 951 (Cellular Communication System) >> Repair Instructions >> OnStar Vehicle Interface Unit Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2001 GMC Yukon XL, 2001 GMC Yukon, 2001 GMC Sierra, 2001 GMC Cab & Chassis Sierra, and 2001 GMC C3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
    IMPORTANT:

    The vehicle interface unit (VIU) has a specific set of unique numbers that tie the module to each vehicle. These numbers, the 10-digit station identification and the 11-digit electronic serial number, are used by the National Cellular Network and OnStar® to identify the specific vehicle. Because these numbers are tied to the vehicle identification number of the vehicle, you must never exchange these parts with those of another vehicle.

  1. Remove the instrument panel (I/P) trim panel. Refer to Instrument Panel Upper Trim Pad Replacement .
    2. Fig 1: VIU Screws
    GM661489Courtesy of GENERAL MOTORS COMPANY
  2. Remove the 2 screws (1) securing the VIU to the bracket.
  3. Disconnect the electrical connectors.
  4. Remove the VIU from the bracket.
  5. The old VIU must be returned for core credit.
scientia non olet · About Mike's Workshop Manuals