Test F: Service Traction System Message Always On
- Perform diagnostic system check. See DIAGNOSTIC SYSTEM CHECK under DIAGNOSIS & TESTING. After performing diagnostic system check, go to next step.
- Disconnect EBCM harness connector. Turn ignition on, with engine off. If SERVICE TRACTION system message is on, go to step 4 . If SERVICE TRACTION system message is not on, go to next step.
- Replace EBCM. After replacing EBCM, go to step 5 .
- Replace instrument panel. After replacing instrument panel, go to next step.
- Using scan tool, clear DTCs. Recheck DTCs. If DTC resets, go to step 2 . If DTC does not reset, system is okay.