Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2000 >> Metro Base, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Air Bag Restraint System) >> Diagnostic Tests >> DTC B1026: Driver Deployment Loop Open >> Conditions For Setting DTC

Conditions For Setting DTC

WARNING: This page is about a different car, the 1999 Pontiac Firefly and 1999 Chevrolet Metro. However, it is still accessible from the selected car via links, so may be relevant.

DTC sets when voltage difference between DRIVER HIGH terminal No. 9 and DRIVER LOW terminal No. 10 is greater than or equal to 400 millivolts for 500 milliseconds during DEPLOYMENT LOOP CONTINUITY, RESISTANCE MEASUREMENT, or CONTINUOUS MONITORING tests.

scientia non olet · About Mike's Workshop Manuals